From 195a14e5c51ec02774c4d1961d0a4b67755e25c8 Mon Sep 17 00:00:00 2001 From: kalomaze <66376113+kalomaze@users.noreply.github.com> Date: Tue, 20 Jun 2023 02:17:32 -0500 Subject: [PATCH] Add new defaults for infer-web.py & adjust english translation (#584) * Adjust defaults of index and volume scale * Adjust eng translation for index and volume envelope --- i18n/en_US.json | 6 +++--- infer-web.py | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/i18n/en_US.json b/i18n/en_US.json index 05ad7c1..5747b0d 100644 --- a/i18n/en_US.json +++ b/i18n/en_US.json @@ -21,9 +21,9 @@ "特征检索库文件路径,为空则使用下拉的选择结果": "Path to the feature index file. Leave blank to use the selected result from the dropdown:", "自动检测index路径,下拉式选择(dropdown)": "Auto-detect index path and select from the dropdown:", "特征文件路径": "Path to feature file:", - "检索特征占比": "Search feature ratio:", + "检索特征占比": "Search feature ratio (controls accent strength, too high has artifacting):", "后处理重采样至最终采样率，0为不进行重采样": "Resample the output audio in post-processing to the final sample rate. Set to 0 for no resampling:", - "输入源音量包络替换输出音量包络融合比例，越靠近1越使用输出包络": "Use the volume envelope of the input to replace or mix with the volume envelope of the output. The closer the ratio is to 1, the more the output envelope is used:", + "输入源音量包络替换输出音量包络融合比例，越靠近1越使用输出包络": "Adjust the volume envelope scaling. Closer to 0, the more it mimicks the volume of the original vocals. Can help mask noise and make volume sound more natural when set relatively low. Closer to 1 will be more of a consistently loud volume:", "保护清辅音和呼吸声，防止电音撕裂等artifact，拉满0.5不开启，调低加大保护力度但可能降低索引效果": "Protect voiceless consonants and breath sounds to prevent artifacts such as tearing in electronic music. Set to 0.5 to disable. Decrease the value to increase protection, but it may reduce indexing accuracy:", "F0曲线文件, 可选, 一行一个音高, 代替默认F0及升降调": "F0 curve file (optional). One pitch per line. Replaces the default F0 and pitch modulation:", "转换": "Convert", @@ -121,4 +121,4 @@ "停止音频转换": "Stop audio conversion", "推理时间(ms):": "Inference time (ms):", "人声伴奏分离批量处理， 使用UVR5模型。
合格的文件夹路径格式举例： E:\\codes\\py39\\vits_vc_gpu\\白鹭霜华测试样例(去文件管理器地址栏拷就行了)。
模型分为三类：
1、保留人声：不带和声的音频选这个，对主人声保留比HP5更好。内置HP2和HP3两个模型，HP3可能轻微漏伴奏但对主人声保留比HP2稍微好一丁点；
2、仅保留主人声：带和声的音频选这个，对主人声可能有削弱。内置HP5一个模型；
3、去混响、去延迟模型（by FoxJoy）：
  (1)MDX-Net(onnx_dereverb):对于双通道混响是最好的选择，不能去除单通道混响；
 (234)DeEcho:去除延迟效果。Aggressive比Normal去除得更彻底，DeReverb额外去除混响，可去除单声道混响，但是对高频重的板式混响去不干净。
去混响/去延迟，附：
1、DeEcho-DeReverb模型的耗时是另外2个DeEcho模型的接近2倍；
2、MDX-Net-Dereverb模型挺慢的；
3、个人推荐的最干净的配置是先MDX-Net再DeEcho-Aggressive。":"Batch processing for vocal accompaniment separation using the UVR5 model.
Example of a valid folder path format: D:\\path\\to\\input\\folder (copy it from the file manager address bar).
The model is divided into three categories:
1. Preserve vocals: Choose this option for audio without harmonies. It preserves vocals better than HP5. It includes two built-in models: HP2 and HP3. HP3 may slightly leak accompaniment but preserves vocals slightly better than HP2.
2. Preserve main vocals only: Choose this option for audio with harmonies. It may weaken the main vocals. It includes one built-in model: HP5.
3. De-reverb and de-delay models (by FoxJoy):
  (1) MDX-Net: The best choice for stereo reverb removal but cannot remove mono reverb;
 (234) DeEcho: Removes delay effects. Aggressive mode removes more thoroughly than Normal mode. DeReverb additionally removes reverb and can remove mono reverb, but not very effectively for heavily reverberated high-frequency content.
De-reverb/de-delay notes:
1. The processing time for the DeEcho-DeReverb model is approximately twice as long as the other two DeEcho models.
2. The MDX-Net-Dereverb model is quite slow.
3. The recommended cleanest configuration is to apply MDX-Net first and then DeEcho-Aggressive." -} \ No newline at end of file +} diff --git a/infer-web.py b/infer-web.py index 28f8de6..cb2dd5f 100644 --- a/infer-web.py +++ b/infer-web.py @@ -1372,7 +1372,7 @@ with gr.Blocks() as app: minimum=0, maximum=1, label=i18n("检索特征占比"), - value=0.88, + value=0.75, interactive=True, ) with gr.Column(): @@ -1388,7 +1388,7 @@ with gr.Blocks() as app: minimum=0, maximum=1, label=i18n("输入源音量包络替换输出音量包络融合比例，越靠近1越使用输出包络"), - value=1, + value=0.25, interactive=True, ) protect0 = gr.Slider(